Field Service Ver. 1.0 Aug. 2005 9. Utility/Counter Mode
119
bizhub 200/250/350Adjustment / Setting
9.3.3 User’s Choice 3/6
A. Low Power Mode
B. Sleep Mode
C. LCD Back-Light OFF
D. Auto Reset
Functions
• To set the time until Low Power starts operating after the last key operation has been
completed.
• Low Power: To turn LED and LCD OFF, and lower the power consumption.
Use • To change the time until Low Power starts.
Setting/
Procedure
• Use the 10-Key Pad for setting.
• The default setting is “15 min.”
“15 min.” (10 to 240)
Functions
• To set the time until Sleep Mode starts operating after the last key operation has been
completed.
• Turn all lines OFF except 3.3 V line for Control.
• “OFF” will only be displayed when “Disable Sleep Mode” in Admin. Management is set.
Use • To change the time until the Sleep Mode starts.
Setting/
Procedure
• Use the 10-Key Pad for setting.
• The default setting is “15 min.”
“15 min” (1 to 240) OFF
Functions
• To set the time until LCD Back-Light OFF starts operating after the last key operation
has been completed.
Use
• To change the time until LCD Back-Light OFF starts operating after the last key opera-
tion has been completed.
Setting/
Procedure
• Use the 10-Key Pad for setting.
• The default setting is “1 min.”
“1 min” (1 to 240)
Functions
• To set the time until Auto Reset starts operating after the last key operation has been
completed.
• Auto Reset: Resets the panel to the default settings.
Use
• To change the time until Auto Reset starts operating after the last key operation has
been completed.
Setting/
Procedure
• The default setting is “1 min.”
30 seconds “1 min” 2 min
3 min 5 min OFF
To Next Page
Loading...
