11. Tech. Rep. Mode Field Service Ver. 1.0 Aug. 2005
196
bizhub 200/250/350
Adjustment / Setting
11.12 ROM Version
11.13 Level History
Functions • To check the ROM version.
Use
• To check the ROM version when firmware is upgraded.
• To check the ROM version when the board is replaced with a new one.
Setting/
Procedure
1. Touch [ROM Version] from the Tech. Rep. mode.
• MSC: MFBS
• Printer: PWB-A
• ADF: PWB-A AF
• LCT: PWB-C1 LCT
• Finisher: PWB-A FN
* If the option is not installed, [None] appears.
Functions • To display the various level histories.
Use • Used for troubleshooting of image problems.
Setting/
Procedure
1. Touch [Level History] from the Tech. Rep. mode.
• ATDC Set: Displays the voltage set with the automatic ATDC sensor adjustment.
• ATDC Current: Displays the T/C ratio for the ATDC sensor.
• Vg Current: Displays the current value of the grid voltage.
• Vb Current: Displays the current value of the developing bias voltage.
To Next Page
Loading...
