Develop ineo 250 - General

Field Service Ver. 1.0 Aug. 2005 1. System configuration
1
JS-502General
General
1. System configuration
A. Type
B. Paper type
C. Machine specifications
D. Operating environment
• Conforms to the operating environment of the main unit.
NOTE
• These specifications are subject to change without notice.
Name Job Separator
Type Expansion drawer
Installation Installed in the copier
Document Alignment Center
Exit Tray Size Type capacity
Tray 1
A6R to A3R
(5.5 to 11 x 17 inch)
width: 90 mm to 297 mm
(3.5 to 11.75 inch)
length: 139.7 mm to 432 mm
(5.5 to 17 inch)
Plain Paper (56 to 90 g/m
2
,15 to 24 lb) 250 sheets
Special
OHP transparencies
20 sheets
Thick paper
(91 to 210g/m
2
, 24.25 to 55.75 lb)
Envelope
Label
Letterhead
Governmentstandard postcards
Tray 2
A5 to A3R
(5.5 to 8.5 inch)
Max.: 297 mm x 432 mm
(11.75 to 17 inch)
Min.: 139.7 mm x 139.7 mm
(5.5 to 5.5 inch)
Plain Paper (56 to 90 g/m
2
,15 to 24 lb)
100 sheets
Power Requirements DC 5 V ± 5 % (supplied from the main unit)
Max. Power Consumption 0.2 W or less
Dimensions
450 mm (W) x 443 mm (D) x 75 mm (H)
17.75 inch (W) x 17.5 inch (D) x 3 inch (H)
Weight Approx. 1.7 kg (3.75 lb)