Develop ineo 250 - 10 Set Error Detection

10. Set error detection Field Service Ver. 1.0 Aug. 2005
32
DF-605
Troubleshooting
10. Set error detection
• When the ADF or cover set error for some reason is detected, the Panel of the main unit
will have the following display.
<Panel display and detection timing for each>
4344F4E504DA
[2]
[1]
Panel
display
Description of error Detection start Detection timing
[1] Upper Door closure
When the document is
loaded into the ADF
Upper Door Open/Close Sensor
(unblocked)
[2] ADF closure
When the document is
loaded into the ADF
Copier Size Reset Switch (ON)