Develop ineo 250 - Stamp; Terminal TX

Field Service Ver. 1.0 Aug. 2005 9. Tech. Rep. Mode
35
FK-503Adjustment / Setting
F. Contact Number
G. User System Code
9.7.2 Terminal TX
9.7.3 Stamp
Functions
• Enters the information call number on a report when a notification to the call center
fails.
Use
Setting/
Procedure
1. Touch [Contact Number] and enter the telephone number.
Functions
• Memo screen, on which to record user system identification information
Use
Setting/
Procedure
1. Touch the [Fwd].
2. Touch [User System Code] and then enter the code.
Functions
• You can receive data on the one touch dial or send the data stored in the system to the
call center.
Use
Setting/
Procedure
1. Touch the [Terminal TX].
2. Set [Function ID Code] and [Extended ID Code] and touch [Execute].
Functions • Used to indicate when the TX marker option is installed.
Use • When the TX marker option is mounted
Setting/
Procedure
• The default setting is “YES”.
“YES” NO