Field Service Ver. 1.0 Aug. 2005 9. Jam Display
37
FS-508/PU-501/OT-601
Troubleshooting
9.3 Solution
9.3.1 Initial Check Items
• When a paper misfeed occurs, first make checks of the following initial check items
Check Item Action
Does paper meet product specifications? Change paper.
Is paper curled, wavy, or damp.
Change paper.
Instruct user in correct paper storage.
Is a foreign object present along the paper path, or is
the paper path deformed or worn?
Clean or change the paper path.
Are rolls/rollers dirty, deformed, or worn? Clean or change the defective roll/roller.
Are the Edge Guide and Trailing Edge Stop at correct
position to accommodate paper?
Set as necessary.
Are actuators found operational as checked for correct
operation?
Correct or change the defective actuator.
To Next Page
Loading...
