Develop ineo 250 - Settings in the User Setting; Users Choice 5;6; Users Choice 6;6

Field Service Ver. 1.0 Aug. 2005 6. Utility/Counter Mode
15
FK-503Adjustment / Setting
6.3 Settings in the User Setting
NOTE
• Only the fax-related functions will be described for User Setting.
6.3.1 User’s Choice 5/6
A. Output Tray Settings
(1) Faxes/Prints
6.3.2 User’s Choice 6/6
A. Default Screen
(1) Default LCD Screen
(2) Default FAX Screen
Functions • To set the output bin in each of different applications when a finishing option is
mounted.
• Different contents of display are given depending on the type of option mounted.
Use • When changing the finishing tray during reception of fax or computer printouts.
Setting/
Procedure
<Port 1>
• The default setting is “1”.
“1” 2 (3)
<Port 2>
• The default setting is “1”.
“1” 2 (3)
<Faxes/Prints>
• The default setting is “1”.
“1” 2 (3)
Functions • To set the default screen that is preferentially selected upon auto clear or similar event.
Use • When changing the default screen that is preferentially selected upon auto clear or sim-
ilar event.
Setting/
Procedure
• The default setting is “Copy”.
“Copy” FAX Scanner FAX/Copy Auto
Functions • To set the default screen that is preferentially selected when the fax is selected.
Use • When changing the default screen that is preferentially selected when the fax is
selected.
Setting/
Procedure
• The default setting is “One-Touch”.
“One-Touch” Search Direct Input Index