Field Service Ver. 1.0 Aug. 2005 9. Utility/Counter Mode
135
bizhub 200/250/350Adjustment / Setting
(6) Division Settings
<Page Division>
<Binary Division>
<Binary Division Size>
9.5.6 LDAP Setting
A. LDAP Search
B. LDAP Server Setting
(1) LDAP Server Name
(2) Server Address
Functions • To set whether or not to make page division during transmission.
Use • To transmit data by dividing it by the page.
Setting/
Procedure
• The default setting is “OFF”.
ON “OFF”
Functions • To set whether or not to make binary division during transmission.
Use • To transmit data through binary division.
Setting/
Procedure
• The default setting is “OFF”.
ON “OFF”
Functions
• To set the binary division size.
Use
• To set the binary division size when Binary Division is set to [ON].
Setting/
Procedure
• The default setting is “500 KB”.
• Setting range: 16 to 2000 KB
• Enter the value from the 10-Key Pad and touch [Enter].
Functions • To enable or disable address search using the LDAP server.
Use • To enable address search using the LDAP server.
Setting/
Procedure
• The default setting is “No”.
Ye s “ N o ”
Functions • To set the LDAP server name.
Use • To enter the LDAP server name.
Setting/
Procedure
1. Touch the [LDAP Server Setting].
2. Touch the LDAP server key to be registered or changed.
3. Touch the [LDAP Server Name].
4. Enter the LDAP Server Name of the local machine from the 10-Key Pad or the key-
board on the screen and then touch [Enter].
Functions • To set the IP address of the LDAP server.
Use • To enter the IP address of the LDAP server.
Setting/
Procedure
• IP address Version 4 format
[0 to 255] . [0 to 255] . [0 to 255] . [0 to 255]
To Next Page