Develop ineo 250 - Page 211

11. Tech. Rep. Mode Field Service Ver. 1.0 Aug. 2005
172
bizhub 200/250/350
Adjustment / Setting
PC2-LCT
LCT
Vertical Transport Vertical Conveyance Sensor
Paper
present
Paper not
present
PC1-LCT Feed Paper Feed Sensor
Paper
present
Paper not
present
PC9-LCT
Shift Tray Paper
Empty
Shift Tray Paper Empty Sensor
Paper
present
Paper not
present
PC3-LCT
Main Tray Paper
Empty
Upper Paper Empty Sensor
Paper
present
Paper not
present
PWB-E LCT Paper Empty Paper Empty Board
Paper
present
Paper not
present
PC7-LCT Lower Overrun Lower Limit Sensor
Malfunc-
tion
Operational
UN1-LCT
Manual Button
Down
Paper Descent Key ON OFF
PC6-LCT Tray Open Tray Set Sensor Open Close
PC4-LCT Raised (Lift-Up) Tray Upper Limit Sensor
At upper
limit
Not at
upper limit
PC13-LCT Lowered (Lift up) Tray Lower Position Sensor
At lower
limit
Not at
lower limit
PC12-LCT Home (Shift) Shifter Home Position Sensor At home
Out of
home
PC11-LCT
Shift Tray Stop
Position
Shifter Return Position Sensor
At stop
position
Not at stop
position
PC10-LCT Elev. Mtr Pulse Elevator Motor Pulse Sensor Blocked Unblocked
PC8-LCT Shift Mtr Pulse Shift Motor Pulse Sensor Blocked Unblocked
PC14-LCT Dividing Position Shift Gate Home Position Sensor At home
Out of
home
PC5-LCT Right Door Open Right Lower Door Sensor Open Close
TH1
Engine
Fusing
Thermistor 1
Fusing Roller Thermistor Analog value
TH2
Fusing
Thermistor 2
Fusing Roller Sub Thermistor Analog value
UN2 ATDC Sensor ATDC Sensor Analog value
TH4 Drum Thermistor Drum Thermistor Analog value
TH3
Temperature
Temperature/humidity Sensor
Analog value
Humidity Analog value
 I/C Discrimination I/C Type Detection signal Analog value
Symbol Panel Display Part/Signal Name
Operation Characteris-
tics/ Panel Display
10