Field Service Ver. 1.0 Aug. 2005 11. Soft Switch List
139
FK-503Adjustment / Setting
NOTE
• The features with (*) are settable by users. *: Screen setting
• The * mark (Screen setting) does not apply to MODE 435 (Network-use).
MODE Factory setting bit
432
Bit: 7654 3210
0000 0101
HEX:05
Bit Feature
Logic
Description
01
7 Wait time (M) at full memory
of PC print
(Set range: 0, 1 to 30 minutes
(1-minute steps)
PC print job is deleted when
the wait time at full memory
expires. *
Bit7-0: 00000000 Immediately
delete
6 00000001 1 min
5 00000010 2 min
4|
3
00000101 5 min
2|
1 00011110 30 min
0 Others Not available
MODE Factory setting bit
433 (Display)
434 (for machine)
435 (Communication)
Bit: 7654 3210
0000 0000
HEX:04
Bit Feature
Logic
Description
01
7 Language selected * Bit 7-2: 000000 Japanese (Display-use)
Select the language to
display on the touch
panel.
(Machine -use)
Select the language for
sender, reception, Activ-
ity report (TX/RX), etc.
(Network-use)
Select the language to
use for e-mail transmis-
sion.
6
000001 English
5 Others Not available
4
3
2
To Next Page
Loading...
