Develop ineo 250 - Page 667

1. Product specifications Field Service Ver. 1.0 Aug. 2005
2
FS-508/PU-501/OT-601
General
(3) Sort Staple
(4) Punch
D. Stapling
*1: Diagonal 30
° for B5 and B4R
E. Hole Punch
F. Machine specifications
G. Operating environment
• Conforms to the operating environment of the main unit.
Type Size Weight Max. Capacity
Plain paper
A6R to A3
5.5 to 11 x17
Max. 297 mm x 431.8 mm
11.75 x 17 inch
Min. 182 mm x 139.7 mm
7.25 x 5.5 inch
56 to 90g/m
2
15 to 24 lb
Exit
Tray1
200 sheets
Exit
Tray2
A4R, 8.5 x 11R
or less
1000
sheets
B4, 8.5 x 14R
or greater
500
sheets
Type Size Weight Exit Tray
Plain paper
B5R/B5 to A3
8.5 to 11 x 17
60 to 90 g/m
2
15 to 24 lb
Exit Tray1
Exit Tray2
OT-601
MT-501
Staple Filling Mode Dedicated Staple Cartridge (5000 staples)
Staple Detection Available (Nearly Empty: 20 remaining staples)
Stapling Position
Front: Diagonal 45° 1 point *1
A4, A3R, B5, B4R
8.5 x 11, 11 x 17
Rear: Diagonal 45° 1 point *1
Front: Parallel 1 point
A4R, B5R, A5
8.5 x 11R, 8.5 x 114R, 5.5 x 8.5
Rear: Parallel 1 point
Side: Parallel 2 point
A4, A4R, A3R, B5, B5R, B4R, A5
8.5 x 11, 8.5 x 11R, 8.5 x 14R, 11 x 17, 5.5 x
8.5
Manual Staple None
No. of Holes Metric: 4holes, Inch: 2holes / 3holes
Punch dust full detection Available
Power Requirements
DC 24 V (supplied from the main unit)
DC 5.1 V (generated by Finisher)
Max. Power Consumption 63 W
Dimensions
319 mm (W) x 558 mm (D) x 573 mm (H)
12.5 inch (W) x 22 inch (D) x 22.5 inch (H)
Weight 21.4 kg (47.25 lb)