Configuring network interfaces Configure mobile (cellular) interfaces
Digi TransPort® Routers User Guide
252
"carrier" command variant Action
carrier ? Displays help text for the carrier command. In
the help text, the available carriers are listed
under the Parameters: heading. Available
command variants are listed under the Syntax:
heading.
carrier
carrier optional msl Downloads the carrier firmware files to the
cellular modem. The carrier firmware file must
be in flash or on a USB stick. You can also
specify a Master Subsidy Lock (MSL) code, if the
carrier requires it.
carrier carrier optional msl -ftp Downloads the carrier firmware files from the
Digi FTPrepository for the cellular modem's
firmware to the cellular modem. You can also
specify a Master Subsidy Lock (MSL) code, if the
carrier requires it.
carrier
ftp-carrier-info Downloads the specific carrier firmware for the
carrier that is active on the module.
carrier switch {auto|carrier} Switch to automatic SIM selection or a
preloaded carrier image.
carrier all Supported for Telit cellular modules only. Loads
all available carrier firmware onto the cellular
module.
carrier status Show status of the current carrier firmware
download operation.
1. Enter carrier ? to verify which carrier firmware is currently running on the cellular module.
2. Verify that the router has enough available flash space to receive the firmware files.
car r i er ?
Cur r ent i mages:
FW i mage: uni que I D = 002. 009_001 bui l d I D = 02. 08. 02. 00_ATT
PRI i mage: uni que I D = 002. 009_001 bui l d I D = 02. 08. 02. 00_ATT
A
v
a
i
l
a
b
l
e
c
a
r
r
i
e
r
s
<a
t
t
|
v
e
r
i
z
o
n|
t
e
l
u
s
|
r
o
g
e
r
s
|
be
l
l
|
s
p
r
i
n
t
|
ge
n
e
r
i
c
>
Par amet er s:
at t - AT&T
ver i zon - Ver i zon
t el us - Tel us
r oger s - Roger s
bel l - Bel l
spr i nt - Spr i nt
gener i c - Gener i c
Synt ax:
car r i er <car r i er > <opt i onal msl > Downl oad f i r mwar e t o t he modem, must
be i n f l ash or USB st i ck
To Next Page
Loading...
