Digi TransPort WR11 - Page 889

Managing networks and connections Analyze data traffic
Digi TransPort® Routers User Guide
889
Command Instance Parameter Values Equivalent web parameter
ana 0 ipprotfilt Comma-separated
list
IP Packet Filters / IP Protocols
ana 0 ipaddfilt Comma-separated
list
IP Packet Filters / IP Addresses
ana 0 discportfilt Comma-separated
list
Discarded IP Packet Filters / TCP/UDP
Ports
ana 0 discprotofilt Comma-separated
list
Discarded IP Packet Filters / IP
Protocols
ana 0 discipaddfilt Comma-separated
list
Discarded IP Packet Filters / IP
Addresses
eth n ethanon on, off Ethernet Interfaces
eth n ipanon on, off IP Sources
ovpn n ipanon on, off IP Sources
ppp n ipanon on, off IP Sources
ppp n pppanon on, off PPP Interfaces
tun n ipanon on, off GRE IP Sources
tun n tunanon on, off GRE Tunnel Interfaces
Related CLI commands not available via the web interface
Command Instance Parameter Values Action
ana 0 fcon on, off Enables serial flow control tracing.
ana 0 stopbufs 0-255 Stops Analyser when number of free system
buffers matches this value.
ana 0 stopmsgs 0-255 Stops Analyser when number of free system
messages matches this value.
ana 0 stopflood 0-1 Stops Analyser when Ethernet flood protection is
activated.
ana 0 lowbufcmd Command
String
Run this command when the number of free
system buffers match lowbuflvel.
ana 0 lowbuflev Integer Displays the free system buffer threshold that
lowbufcmd uses.
ana 0 lowmsgcmd Command
String
Run this command when the number of free
system messages match lowmsglvel.
ana 0 lowmsglev Integer Displays the free system message threshold that
lowmsgcmd uses.