Digi TransPort WR11 - Page 890

Managing networks and connections Analyze data traffic
Digi TransPort® Routers User Guide
890
Command Instance Parameter Values Action
ana 0 logdrive String Specifies an alternate file system drive on which
to store the Analyser trace. To use an external
USB flash device, this should be set to u:
If the router has an internal SDIO flash device,
select it by specifying s:
ana 0 logfile Filename Stores the Analyser trace in the named file on an
alternate drive.
ana 0 contfile Filename Stores the Analyser trace in the named file on an
alternate drive once the file indicated by logfile is
reaches its max size as specified by logsizek.
ana 0 logsizek Value in
Kbytes
Sets the maximum size in Kbytes of the file on the
alternate drive.
When set to 0, the file size is only limited by the
flash device.
ISDN Sources
LAPD2 LAPD1 LAPD0 Value
OFF OFF OFF 0
OFF OFF ON 1
OFF ON OFF 2
OFF ON ON 3
ON OFF OFF 4
ON OFF ON 5
ON ON OFF 6
ON ON ON 7
LAPB Links
LAPD1 LAPD0 Value
OFF OFF 0
OFF ON 1
ON OFF 2
ON ON 3