Programming
Service Instructions 755 A/756 A - 00.0 - 02/2019 285
Fig. 269: Assigning an available pocket program slot (2)
Information
Pocket programs highlighted in blue are already in use in other seam
sequences.
The currently selected pocket program is highlighted in orange.
3. Select the desired pocket program.
You can select no more pocket programs than there are available
pocket program slots (up to 8).
The order in which they are selected corresponds to the order of
the programs in the seam sequence.
To scroll up and down the list of pocket programs, press the
buttons
and .
To Next Page
Loading...
