Programming
290 Service Instructions 755 A/756 A - 00.0 - 02/2019
Copying a seam sequence
To copy a seam sequence:
1. Press the Seam sequence button.
 The display switches to Overview of sequences.
Fig. 276: Copying a seam sequence (1)
2. Select the seam sequence you wish to copy from the list.
 To scroll up and down the list of sequences, press the buttons
and .
3. Press the desired seam sequence.
 The selected seam sequence is highlighted with a bold frame and the
color orange (1).
4. Press the button.
 The display switches to Copy sequence.
(1) - Selected seam sequence (2) - Copy seam sequence
To Next Page
Loading...
Need help?
General
