DURKOPP ADLER 755 A

Programming
326 Service Instructions 755 A/756 A - 00.0 - 02/2019
To set the corner knife:
1. Press the desired button.
2. Enter the desired value using the numeric keypad.
3. Confirm with OK.
Set corner knife correction seam begin./seam end
Fig. 307: Set corner knife correction seam begin./seam end
Corner knife seam begin. right UP/DOWN
Corner knife seam end left UP/DOWN
Correct corner knife angle seam end left  p. 327
• -9.9° - 9.9°
Correction seam end left  p. 326
• -9.9 mm - 9.9 mm
Correction seam end right  p. 326
• -9.9 mm - 9.9 mm
Correct corner knife angle seam end right  p. 327
• -9.9° - 9.9°
Corner knife seam end right UP/DOWN
Symbols Meaning