Programming
344 Service Instructions 755 A/756 A - 00.0 - 02/2019
Selecting pedal mode
 The display switches to Select pedal mode
Fig. 320: Selecting pedal mode
To select pedal mode:
1. Press the desired button.
Symbols Meaning
Press pedal 1 x and keep it there
• the loading process is completed without stop
Push pedal after each step
• Vacuum, downholder and transport clamp are each triggered with
one step during the loading process
• the sewing process starts after the flap clamps have been lowered
Transport clamp start after pushing pedal
• Vacuum, downholder and transport clamp are each triggered with
one step during the loading process
• The flap clamps can be opened or closed again after the flap clamps
have been lowered, and the sewing process is started
To Next Page
Loading...
Need help?
General
