Programming
Service Instructions 755 A/756 A - 00.0 - 02/2019 407
Y16 Marking lamp 4
Y17 Lower left transport clamp
Y18 Lower right transport clamp
Y19 Lift left transport clamp
Y20 Lift right transport clamp
Y21 Close folding plates
Y22 Open left flap clamp
Y23 Open right flap clamp
Y24 Blowing On (flap clamp)
Y25 Stacker on/stacker tongs forward
Stacker on/blow out
Y26 Stacker bracket swiveled out
Y27 Corner knife up seam begin. left
Y28 Corner knife up seam end left
Y29 Corner knife up seam begin. right
Y30 Corner knife up seam end right
Y31 Lower outfeed roller
Y32 Blowing on (folding plate)
Y103 Cut tape
Y104 Press on/loosen tape
YC101 Marking lamp 5
YC102 Marking lamp 6
YC103 Marking lamp 7
YC104 Marking lamp 8
YC105 Open waistband clamp
YC106 Close waistband clamp
YC107 Needles waistband clamp
YC108 Pocket bag clamp
YC109 Zipper drive dog (grab)
YC110 Zipper cutter (swivel)
YC111 Zipper cutter (cut)
YC112
Zipper folder, 2
nd
cylinder
YC113 Zipper drive dog forward
YC114 Transport clamp zipper drive dog
To Next Page
Loading...
Need help?
General
