DURKOPP ADLER 755 A

Programming
406 Service Instructions 755 A/756 A - 00.0 - 02/2019
2. Select an output in the right area:
Outputs 755 A/756 A
S103 Ref. step motor pocket length
S104 Reference needle transport
S105 Ref. clamp left
S106 Ref. clamp right
S601 Reference slanted seam end
S602 Reference slanted seam beginning
S701 Ref. knife right, seam beginning
S702 Ref. knife left, seam beginning
S801 Ref. knife right, seam end
S802 Ref. knife left, seam end
S902 Tape control
S1001 Reference laser 1
S1002 Reference laser 2
SC101 Zipper cutter up
SC102 Zipper folder up
SC103
Zipper folder, 2
nd
cylinder up
SC104
Zipper folder, 2
nd
cylinder down
Y1 Needle thread cutter
Y2 Hook thread cutter
Y3 Needle thread tension on
Y4
2
nd
needle thread tension left
Y5 Blow out fluff RFW + thread advancing device
Y6
2
nd
needle thread tension right
Y7 Needle left on
Y8 Needle right on
Y9 Lift folder off
Y10 Lower folder
Y11 Vacuum on
Y12 Lower downholder
Y13 Marking lamp 1
Y14 Marking lamp 2
Y15 Marking lamp 3