DURKOPP ADLER D867 M-Type Delta

Programming
Service Instructions M-TYPE DELTA - 00.0 - 12/2019 125
Change of stitch length
Optimization of the remaining thread length
for the cutting systems
KFA = 1, extra short
LFA = 10, extra long
Change of stitch
length
• Value range
On/Off
Stitch length
• Value range
01 - 10
On
Position of the needle
when the change of
stitch length is
activated.
• Value range
000 - 359 [°]
Off
Position of the needle
when the change of
stitch length is
deactivated.
• Value range
000-359 [°]
Thread trimming backward stitch • Value range
On/Off
Icon Menu items Value range