Programming
Service Instructions M-TYPE DELTA - 00.0 - 12/2019 157
Daily piece counter
Counter Mode
• Value range
Off/Up/Down
Reset
Enter the value to which
the daily piece counter is
set when a reset is
performed.
• Value range
-999 - 999
Stitch functions
Count stitches • Value range
On/Off
Correction
Backward stitches
• Value range
On/Off
Default Program Parameters
Forward Sound • Value range
On/Off
Segment switch by pedal • Value range
On/Off
Program Abort
Mode Position = after the
cancellation, the needle
is merely brought to its
end position and the
thread is cut
Segment End = ending
of the program with all
configurations that are
set for this seam section
Thread trimmer • Value range
On/Off
Pedal Abort • Value range
On/Off
Icon Menu item Value range
To Next Page
Loading...
