DURKOPP ADLER D867 M-Type Delta

Working basis
Service Instructions M-TYPE DELTA - 00.0 - 12/2019 15
Fig. 1: Calling up the service routine (1)
4. Press the button.
 A request appears to press the Service Stop button.
Fig. 2: Calling up the service routine (2)
5. Press the Service Stop button.
 The machine moves to the programmed position and is switched off.
The button lights up.
The display shows the information that the Service Stop is active:
Fig. 3: Calling up the service routine (3)
6. Make the required settings.