User Manual Section 4
GFK-2958L May 2021
Detailed Descriptions of the Fieldbus Network Adapters 112
4.4.28 0x113C – 0x113F Save Module Parameters
Load default module parameters (0x113C – 0x113D) loads the default parameter set of all
modules (LOAD). This conforms to the Standard option in the web server.
Save module parameters (0x113E – 0x113F) stores the current image of all module
parameters in the network adapter (SAVE). Subsequent changes will not be considered
unless they are saved again. There is no need to enter parameters again after restarting the
network adapter. This conforms to the Yes option in the web server.
Inputs in both register in the Motorola format follow this scheme:
To Next Page
Loading...
