Emerson PACSystems RSTi-EP - Displaying the Context Menu; Creating a New Project; Saving a Project; Opening a Project

User Manual Section 13
GFK-2958L May 2021
IO-Link Device Configuration 508
13.3.4 Displaying the context menu
What functions are displayed in the context menu depends on the current program
context. The functions relate to the current displayed view in the program. Click
☰ to
display the context menu.
Figure 348: Displaying the context menu
13.3.5 Creating a new project
A project incorporates the configuration of an IO-Link communication module.
➢ Navigate to the IO-Link port overview.
➢ Open the context menu.
➢ Click Create new.
➢ If you wish to discard the existing project, click OK.
A new project is created.
13.3.6 Saving a project
A project incorporates the configuration of an IO-Link communication module.
➢ Open the context menu.
➢ Click Save as.
➢ Select a storage location and a file name and click Save.
The project is saved with the file ending “.emr ”.
After you have saved a project for the first time, you can save the changes by clicking on
Save.
13.3.7 Opening a project
➢ Navigate to the IO-Link port overview.
➢ Open the context menu.
➢ Click Open.
➢ Select the required project (.emr) and click Open.
➢ If you wish to discard the existing project, click OK.
The project is opened.
13.3.8 Changing the language
You can change the language of the user interface.
➢ In the menu bar, click Language.
➢ Select the required language.