User Manual Section 9
GFK-2958L May 2021
Web Server 467
Figure 318
•
To force a module: Click on the respective channel.
•
To accept an individual change: Click Apply changes.
•
To accept all changes: Click OK.
9.7.4 Open the Detail View of the Station in Force Mode
For a better survey we recommend changing to the detail view. In this view modules can be
fade out and in, which is helpful, especially when working with larger stations.
•
To open the detail view in force mode: From the menu bar, click Force and Node.
Figure 319
All active modules are displayed in the overview. The switchable channels are provided with
a changeover switch.
To Next Page
Loading...
