User Manual Section 9
GFK-2958L May 2021
Web Server 469
9.7.7 Manually Switching Outputs (Forcing)
•
To switch a channel: Click on the corresponding module in the Node display.
Figure 322
•
To accept an individual change: Click on Apply changes.
•
To accept all changes: Click OK.
9.7.8 Modules with Registers
Modules with registers (for example, counter modules and PWM modules) can be forced
individually.
•
To force individual modules with registers
1.
Click on the channel that needs to be forced, enter the required value, and click
Apply Changes.
To Next Page
Loading...
