User Manual Section 13
GFK-2958L May 2021
IO-Link Device Configuration 510
13.4.2 Changing the device type
Some IODDs describe several device types. You can change the device type.
Figure 351: Changing the device type
➢ Navigate to the IO-Link port overview.
➢ For the IO-Link port for which you want to change the device type, click Change
type (double arrow icon).
A dialogue window is displayed containing the available device
types.
➢ Select the required device type from the list.
➢ Click OK.
13.4.3 Removing the IO-Link device assignment
Figure 352: Deleting the IO-Link device
➢ Navigate to the IO-Link port overview.
➢ For the IO-Link port for which you want to remove the assignment, click Remove
(bin icon).
The assignment of the IO-Link device to this IO-Link port is removed.
13.4.4 Editing the IO-Link device parameters
Figure 353: Parameterizing the IO-Link device
➢ Navigate to the IO-Link port overview.
➢ For the IO-Link device whose data you want to edit, click Edit (cog icon).
➢ The detailed view of the IO-Link device is opened.
Note: The parameters of an IO-Link device are defined by its manufacturer.
To Next Page
Loading...
