Epson WorkForce Enterprise WF-C21000 Series - Page 357

c
Important:
Adjust the data so that it is not printed at the punch position. If you punch on the printed area, it may cause punch
failure or a paper jam.
Print Settings (Windows)
1.
On the printer driver’s Finishing tab, select the hole punching position from Punch.
2.
Set the other items, and then click OK.
3.
Click Print.
Related Information
& “Printing from a Computer - Windows” on page 48
& “Finishing Tab” on page 51
Print Settings (Windows PostScript)
1.
On the printer driver's Advanced Options, click Printer Features in Document Options.
2.
Select the hole punching position from Punch.
3.
Set the other items, and then click OK.
4.
Click Print.
Related Information
& “Printing a Document Using the PostScript Printer Driver (Windows)” on page 74
& “Advanced Options” on page 78
Print Settings (Mac OS)
1.
Select Finishing from the pop-up menu, and then select the hole punching position from Punch.
2.
Set the other items, and then click OK.
3.
Click Print.
Related Information
& “Printing from a Computer - Mac OS” on page 79
& “Menu Options for Finishing” on page 83
Using Optional Items > Booklet Finisher > Using the Booklet Finisher
357