Print Settings (Mac OS PostScript)
1.
Select Printer Features from the pop-up menu, and then select Output from Feature Sets.
2.
Select the hole punching position from Punch.
3.
Set the other items, and then click OK.
4.
Click Print.
Related Information
& “Printing from the PostScript Printer Driver on Mac OS” on page 88
& “Menu Options for Printer Features” on page 91
Folding or Creating a Booklet of Each Set of Copies from a Computer
You can use the optional Booklet Finisher to fold or saddle stitch the printed paper.
Print Settings (Windows)
1.
On the printer driver’s Finishing tab, select Fold (Print Outside), Fold (Print Inside), or Fold and Saddle
Stitch from Fold/Saddle Stitch.
2.
Click Settings, set the Binding Edgethe and so on, and then click OK.
3.
Set the other items, and then click OK.
Note:
❏ If booklets or paper remain in the booklet tray, you will not be able to start bookbinding printing. Make sure there is
nothing on the booklet tray.
❏ If you want to print on one side, set 2-Sided Printing on the Main tab to O. When printing on one side, you
cannot set Start Page or Booklet in Binding Settings.
4.
Click Print.
Related Information
& “Printing from a Computer - Windows” on page 48
& “Finishing Tab” on page 51
Print Settings (Windows PostScript)
1.
On the printer driver's Advanced Options, click Printer Features in Document Options.
Using Optional Items
>
Booklet Finisher
>
Using the Booklet Finisher
358
To Next Page
Loading...
Need help?
General
