System Basics 109
Note:
This action will page the PSD that is showing the currently selected cue list. If
there is no PSD visible showing that cue list, nothing will be paged.
Indicators in the Playback Status Display
This section identifies the color and text conventions used to indicate various playback
conditions.
Color Indicators
Cue List
Gold - Any item (cue, list, page) highlighted in gold indicates “current”.Outlined in gold
indicates “selected”.
Red - Cue fade is in progress
Fader Ribbon / Display
Red - Grandmasters and inhibitive submasters
Yellow - Additive submasters
Green - Playback faders
Orange - Presets and palettes
Text Indicators
+ (see cue 6) - Indicates that there is discrete timing within the associated cue. Found in
the cue display “Timing” area.
* (see cue 4) - Indicates the cue has an allfade command. Found in the cue display
“Flags” area.
* - Indicates a link to a non-existent cue. Found in the cue display "Link" area.
D - Indicates a dark move, a cue that has any non-intensity parameters moving on
channels whose intensity is at 0. Found in the cue display “Flags” area in the move
column.
x - Indicates that a mark has been placed, but the mark is broken.
A or a (see cues 3 & 4) - Indicates an asserted cue. “A” indicates the entire cue is
asserted. “a” indicates a channel or parameter assert only. Found in the cue display
“Flags” area.
B or b (see cues 2 & 5) - Indicates a blocked cue. “B” indicates the entire cue is blocked.
“b” indicates a channel/ parameter block only. Found in the cue display “Flags” area.
F1 - F10 - Indicate faders numbered 1 through 10 on the console. Found at the bottom
of the fader display.
To Next Page
Loading...
Need help?
General
