296 Eos Apex, Eos Ti, Gio, Gio @5, Ion Xe, Ion Xe 20, and Element 2 User Manual
Mode
You may define your fader as additive (contributes to the live output), inhibitive (limits live
output) or an effect fader (presets only).
Master
A fader can be assigned as a Master. When it is a master, its behavior as a Proportional Master
or Intensity Master (I-Master) is drawn from this setting.
HTP
Intensity playback behavior can be set to HTP (highest takes precedence) or LTP (latest takes
precedence).
Restore
Faders can be placed into restore modes of minimum or background, which is the default.
When a fader is in the restore to background mode, the restore column of the fader list display
will be blank. When in minimum mode, 'Min' will display in the restore column.
The restore mode of background means that when the fader is returned to zero, control will
be restored to the background value, such as another fader or a cue.
The restore mode of minimum means that when the fader is faded down, control does not go
to the previous background state but to the parameters’ minimum value.
Priority
The Independent setting for faders has been changed to priority. There are 10 levels of priority
for faders. 1 is the lowest and 10 is the highest. faders can still be shielded, which means that
their content is automatically made exclusive and can't be controlled by anything other than
that fader and park, including by manual control. Shielded has a higher priority than 10.
Background
Faders can have their background states disabled. Background states are enabled by default.
When enabled, the content of the fader will act as a background or previous state for other
cues and faders.
Background Priority
Background can have a priority assigned to it.
To Next Page
Loading...
Need help?
General
