344 Eos Apex, Eos Ti, Gio, Gio @5, Ion Xe, Ion Xe 20, and Element 2 User Manual
Using Go To Cue Out
To reset all parameters to their default state (unless they are controlled by a submaster) and
reset all cue lists that are loaded to faders so that the first cue of each list is pending, press:
[Go To Cue] [Out] [Enter]
Note:
The [Go to Cue] [Out] command will not affect a cue list that is in Solo Mode
(on page328)
To Next Page
Loading...
