428 Eos Apex, Eos Ti, Gio, Gio @5, Ion Xe, Ion Xe 20, and Element 2 User Manual
Note:
Any cues or submasters that have overrides, such as rate, for the effect will
display an *.
[About] Groups
When a group is selected, the following information will be displayed:
group number
the group label (if any)
the channels in the group
The {Ordered} and {Numerical} softkeys can be used to change the display view in About
Groups.
[About] Submaster
The following information will be displayed when a submaster is selected:
The submaster number
Label (if any)
Current value
Mode (additive, inhibitive, or effectsub)
Fader (proportional or intensity master)
HTP or LTP
Exclusive
Priority
Timing
Fader Pages
Channels in Submaster
Effects assigned
[About] Macro
[About] Macro display shows a list of cues that will execute a selected macro. To view this
display, you must be in the Macro Editor Display. While in that display, press [About] and then
select the macro by using a mouse or touchscreen.
[About] IFCB Palettes
The following information will be displayed when an intensity, focus, color, or beam palette is
selected:
the number of cues the palette is used in
the number of presets the palette is used in
the number of channels
the first cue the palette is used in
the last cue the palette is used in
the number of cue lists that use the palette
{Usage} displays the following information about palettes:
Number of cues that move
List of channels that use the palette in a cue
List of channels stored in the palette that are not used in a cue
List of cues in which the palette have a move instruction
List of effects that use the palette
List of presets that the palette is stored in
To Next Page
