ETC Element 2 User Manual

Augment3d 489
Beam Center Labels
Toggles labels in the center of the simulated beam for all, automated, selected, and / or active
fixtures. Also available in Toolbar >Labels.
Focus Handles
Toggles beam-end handles for all, automated, selected, and / or active fixtures, and text labels
for each handle. Also available in Toolbar >Labels.
Stick Beams
Toggles Stick Beams for all, automated, selected, active, and / or inactive fixtures. Also
available in Toolbar >Labels.
Light Beams
Toggles beams for all, automated, or selected fixtures. Also available in Toolbar >Light.
Cue Preview Mode
Toggles Cue Preview between Default (off) and Pending Cue. Pending Cue mode allows
Augment3d to display a virtual preview of the look used in the next upcoming cue. Also
available in Toolbar >Options.
Reset
Reset Settings to Default
Resets all settings in Preferences back to defaults.
Reset UI to Default
Resets the Augment3d window size and layout back to defaults.

ETC Element 2 Specifications

General

DMX Outputs	2
Touchscreen	Yes
Networking	Ethernet
Type	Lighting Control Console
Master Faders	2
Encoders	4
Ethernet Ports	2
USB Ports	4
Video Output	DisplayPort
Power Input	100-240VAC, 50/60Hz
Power Supply	Internal
Control Channels	6144
Output	Art-Net
Display	Multi-Touch LCD
Storage	Solid State Drive (SSD)