Virtual Media Server 535
Steps for Configuring a Multi-Console System
Once the Eos Family Pixel Mapping Installer has been installed on all consoles, follow these
steps to configure your multi-console system:
Setting up the Primary
1. On the primary console, exit to the Eos Configuration Utility (ECU).
2. Press the {Settings} button.
3. Press {General} if needed.
4. Make sure that the {Share Media Archive} box is checked. This will allow for sharing of
the primary’s media archive. Copy the path name, you will need it to setup the backup
and / or client.
5. Setting up the Backup and Clients
6. On the backup or client, exit to the Eos Configuration Utility (ECU).
7. Press the {Settings} button.
8. Press {Maintenance}.
9. Press {Network Drives}.
10. In the Network Drives display, click the {Add} button.
11. In the Add Network Drive display, choose a drive letter for {Local Drive}.
12. Enter in the {Network Path}. The path name is listed next to the primary’s {Share Media
Archive} checkbox.
To Next Page
Loading...
