Eos Configuration Utility 567
{Restore Show Archive...}
Allows you to restore show files from a USB drive.
{Backup System Settings...}
Allows you to backup all ECU settings, including Net3 services. {Backup System Settings...}
will open a window that allows you to save an .ini file to a selected drive. To backup settings,
select a drive from the drop down menu, and press {Accept} to save or {Cancel} to exit without
saving.
{Restore System Settings...}
Open a window that allows you to select a saved.ini file. Select the desired file and press {Ok}
to restore settings. Press {Cancel} to close the window without restore settings.
{Face Panel Test...}
Provides a way to verify the functional state of all of the keys, encoders, and faders on the
console. Press/ move every key, encoder, and fader to verify that those events register on the
diagnostic test screen.
{Classic Peripheral Test...}
Allows you to test peripherals such as fader wings.
{File Manager...}
Provides a way to manage show files and software installers. You can create and delete new
folders, move, and copy files between the console and USB drives.
The file manager display will show the ShowArchive folder on your console as well as any
external USB drives that are detected. The display is split into two windows, so you can see
two different folders at the same time for copying or moving data between them.
{Gateway Configuration Editor (GCE)...}
Launches the GCEsoftware. This softkey will only display if the software is installed on your
console.