568 Eos Apex, Eos Ti, Gio, Gio @5, Ion Xe, Ion Xe 20, and Element 2 User Manual
{Concert...}
Launches the Concertsoftware. This softkey will only display if the software is installed on
your console.
{UpdaterAtor...}
Launches the UpdaterAtorsoftware. This softkey will only display if the software is installed on
your console.
{Touch Screen Test...}
Opens an application for testing your touchscreens.
{Upgrade Console...}
This softkey is used for upgrading the console's outputs.
{Upgrade I/O Firmware...}
Note:
This option is for use with older I/O cards.
This softkey upgrades the firmware in the console’s I/O card.
When you first open the I/O Downloader, it will look for the connected console. This may take
several seconds.
Once the console is found, the downloader will search for the needed files. If it finds the file, it
will list it and you can click {Download}. If it doesn't find the file, you can use {Browse} to look
for the needed file and selected it. Once finished, click {Exit}.
{Network Drives...}
Allows you to select an alternative show file storage location on another console or computer.
After setting this location, it will appear as an option within the save and open dialogs in Eos.
In the {Network Drives...} dialog box, there is a {Add} button for mapping a network drive. In
the Add Network Drive dialog box, select the drive letter that is appropriate, the network path,
and the path type. The network path can use either the IP Address or the Device Name.
(Example: \\10.101.90.101\ShowArchive or \\YourDeviceName\ShowArchive) The network
To Next Page
Loading...
