ETC Element 2 - Page 621

Show Control 607
Creating a Note Off Event
Create a new event and open the MIDI String configuration screen
•
<Event> [2] [More SK] {MIDI String}
Select the {Note Off} type
•
{Note Off}
Select the MIDI Note value, for example, Bb (B-flat)
•
{A#/Bb}
Select the MIDI Note octave or leave it as Any. In this example, we’ll choose Any.
•
<Octave> {Any}
Select the MIDI channel
•
<Channel> {1}
Select the velocity
•
<Velocity> {0}
Optionally, select the velocity threshold so that the event will be triggered if the message is
above this level. To disable velocity threshold, leave it at zero.
•
<Velocity Threshold> {1}
Press {OK} to save the event
•
{OK}
Specify the action for the event
•
<Event> [2] [Macro] [2] [Enter]
Creating a Program Change Event
Create a new event and open the MIDI String configuration screen
•
<Event> [3] [More SK] {MIDI String}
Select the {Program Change} type
•
{Program Change}
Select the MIDI channel
•
<Channel> {7}
Select the program number
•
<Program Number> {3}{2}
Press {OK} to save the event
•
{OK}
Specify the action for the event
•
<Event> [3] [Cue] [1][0] [Enter]
Creating a Control Change Event
Create a new event and open the MIDI String configuration screen
•
<Event> [4] [More SK] {MIDI String}