Show Control 615
OSC Method Arguments Examples/Comments
<parameter 2>
levels
multiple numbers for each
parameter level
pan & tilt to 45)
/eos/param/pan/tilt=45,90
(set pan to 45 & tilt to 90)
OSCColor
OSC Method Arguments Examples/Comments
/eos/color/hs
Argument 1: Hue (0.0-
360.0) Argument 2:
Saturation (0.0-100.0)
/eos/color/hs=330.0, 75.0 (pink color with 75%
saturation)
/eos/color/hsxy
Argument 1: X (0.0-1.0)
Argument 2: Y (0.0-1.0)
For simulating the Hue/Saturation wheel in a 2D XY
graph where bottom-left corner is (0.0, 0.0) and top-
right corner it (1.0, 1.0) /eos/color.hsxy=0.82, 0.31 (pink
color with 75% saturation)
/eos/color/rgb
Argument 1: Red (0.0-
1.0) Argument 2: Green
(0.0-1.0) Argument 3:
Blue (0.0-1.0)
/eos/color/rgb=1.0, 0.25, 0.63 (pink color with 75%
saturation)
/eos/color/xy
Argument 1: x (0.0-1.0)
Argument 2: y (0.0-1.0)
For setting (x, y) chromaticity point in the CIE 1931 xyY
color space /eos/color/xy=0.464, 0.254 (pink color with
75% saturation)
/eos/color/xyz
Argument 1: X
Argument 2: Y
Argument 3: Z
For setting (X, Y, Z) color point in XYZ color space
/eos/color/xyz=0.851, 0.466, 0.516 (pink color with 75%
saturation)
OSCWheel
A wheel can be used to adjust channel levels and parameters.
OSC Method Arguments Examples/Comments
/eos/pantilt/xy
Argument 1: X (0.0-
1.0) Argument 2: Y
(0.0-1.0)
For 2D Pan/Tilt graph where
bottom-left corner is (0.0, 0.0)
and top-right corner if (1.0, 1.0)
Level Wheel
/eos/wheel/level
number for wheel ticks
for the specified wheel
mode (positive or
negative)
/eos/wheel/level=1.0 (increase
value)
/eos/wheel/level=-1.0 (decrease
value)
/eos/wheel/level=4.0 (increase
value rapidly)
(defaults to Coarse mode, but
wheel mode can be changed
with the /eos/wheel command
below)
/eos/wheel
number for wheel
/eos/wheel=1.0
To Next Page
Loading...
