ETC Element 2 - Page 630

616 Eos Apex, Eos Ti, Gio, Gio @5, Ion Xe, Ion Xe 20, and Element 2 User Manual
OSC Method Arguments Examples/Comments
mode: 0=coarse,
1=fine
Wheel Output - see Implicit OSC Output for more information
/eos/out/wheel
number for current
wheel mode: 0=coarse,
1=fine
/eos/out/wheel=1.0
/eos/out/active/wheel/# /eos/out/active/wheel=4
/eos/out/pantilt
Current pan/tilt values of
selected channel
Indexed Wheels - see Active Parameters
/eos/wheel/<index>/level
number for wheel ticks
for the specified wheel
mode (positive or
negative)
/eos/wheel/2/level=1.0 (increase
value)
/eos/wheel/2/level=-1.0
(decrease value)
/eos/wheel/2/level=4.0 (increase
value rapidly)
(defaults to Coarse mode, but
wheel mode can be changed
with the /eos/wheel command
below)
/eos/wheel/<index>
number for wheel
mode: 0=coarse,
1=fine
/eos/wheel=1.0
Parameter wheels and encoders
/eos/wheel/<parameter>
number for wheel ticks
(positive or negative)
/eos/wheel/pan=1.0
/eos/wheel/<parameter 1>/
<parameter 2>/...
number for wheel ticks
(positive or negative)
/eos/wheel/pan/tilt=1.0
/eos/wheel/fine/<parameter>
number for fine wheel
ticks (positive or
negative)
/eos/wheel/fine/pan=1.0
/eos/wheel/fine/<parameter 1>/
<parameter 2>/...
number for fine wheel
ticks (positive or
negative)
/eos/wheel/fine/pan/tilt=1.0
/eos/wheel/course/<parameter>
number for coarse
wheel ticks (positive or
nega tive)
/eos/wheel/coarse/pan=1.0
/eos/wheel/course/<parameter
1>/
<parameter 2>/...
number for coarse
wheel ticks (positive or
negative)
/eos/wheel/coarse/pan/ tilt=1.0