ETC Element 2 - Page 632

618 Eos Apex, Eos Ti, Gio, Gio @5, Ion Xe, Ion Xe 20, and Element 2 User Manual
OSC Method Arguments Examples/Comments
mode can be changed with the
/eos/wheel command)
/eos/active/wheel/fine/<index>
number of fine
wheel ticks
(positive or nega-
tive)
/eos/active/wheel/fine/1=1.0
/eos/active/wheel/course/<index>
number of coarse
wheel ticks
(positive or nega-
tive)
/eos/active/wheel/coarse/ 1=1.0
Switch
/eos/active/switch/<index>
number of wheel
ticks for the
specific switch
mode (positive or
nega- tive)
/eos/active/switch/1=1.0 (increase
value)
/eos/active/switch/1=-1.0 (decrease
value)
/eos/active/switch/1=4.0 (increase
value rapidly)
/eos/active/switch/1=0.25 (increase
value slowly)
(defaults to Coarse mode, but wheel
mode can be changed with the /eos/
switch command)
/eos/active/switch/fine/<index>
number of fine
wheel ticks
(positive or nega-
tive)
/eos/active/switch/fine/1=1.0
/eos/active/switch/coarse/<index>
number of coarse
wheel ticks
(positive or nega-
tive)
/eos/active/switch/coarse/ 1=1.0
Active Wheel Data Sent by Eos - see Implicit OSC Output (on page630) for more
information
/eos/out/active/wheel<number>
2
arguments:String
with parameter
name and current
value from first
channel
/eos/out/active/wheel/1=”Intensity”,
100
OSCSubscribe to Specific Parameters
Once subscribed, Eos will reply with an OSC packet per parameter as they change.
For example:
•
/eos/out/param/pan