Console Overview 67
Ion Classic Components
Power Button
The power button on the front of the console is used to power up or power down. A separate
hard power switch, located on the rear panel, can be used to disconnect power from the
console’s internal components.
CAUTION:
It is recommended that you safely power down the console via
Displays > Power Off Device, before disconnecting power from the console.
CAUTION:
Power cord must be connected using an earth ground
connection.
WARNING: Before servicing your console, you must switch off the power
on the rear panel and disconnect the power cord completely.
External Monitors
Display Port can use an active adapter to VGA, DVI, or HDMI. DVI-I can be converted to VGA
with a passive adapter.
Note:
Output to 4K resolution monitors may affect console performance. ETC
recommends an external monitor resolution of 1024 or lower.
For monitor configuration, see
{Monitor Arrangement...} (on page556)
.
To Next Page
Loading...
