Extron electronics DMP 128 FlexPlus User Manual

DMP 128 FlexPlus • Web Pages 173
4. Select the QoS DSCP checkbox to read DSCP values from the network and
automatically configure layer 3 QoS.
NOTE: VLAN ID, QoS PCP, and QoS DSCP values read from the network and
applied to the DMP 128 FlexPlus overwrite any manually specified values.
5. Select the Inventory checkbox to send the DMP 128 FlexPlus model number, part
number, and firmware details to the network switch.
6. Select the Civic Location checkbox to send the location details entered into the
Civic Location panel. This is useful when logging the physical location of the
DMP128FlexPlus for network management purposes.
3
Apply Button — Click the Apply button to commit Qos and LLDP-MED changes to
the device.
Transport
1
Transport Protocol Configuration
5
Local Cert
2
Use Secure RTP (AES CTR) Checkbox
6
Private Key
3
TLS Mode Drop-Down
7
Server Certs
4
Local Mode Drop-Down
8
Apply Button
Figure 200. VoIP Network Transport Page
1
Transport Protocol Configuration — Select UDP (default), TCP, or TLS transport
protocols.
NOTE: When TLS is selected, the listening port changes from 5060 to 5061. The
listening port can be manually adjusted.
2
Use Secure RTP (AES CTR) Checkbox — Check this box to encrypt RTP audio
streams using the AES CTR cipher.
figure 190. Transport
PRELIMINARY
PRELIMINARY

Extron electronics DMP 128 FlexPlus Specifications

General

Brand	Extron electronics
Model	DMP 128 FlexPlus
Category	Computer Hardware
Language	English