DMP 128 FlexPlus • Web Pages 174
3
TSL Mode Drop-Down — Choose Always Allow or Always Verify TLS modes.
NOTE: This option is only available when TLS is selected as the transport protocol.
4
Local Mode Drop-Down — Choose a default local certificate or upload a custom
local certificate to the DMP 128 FlexPlus. When the default certificate is selected, click
Generate to force the DMP 128 FlexPlus to self-generate a new local certificate and
private key. Self-generated certificates can be exported by clicking the Export button.
NOTE: Certificates and private keys must be in the Privacy Enhanced Mail (PEM)
format. The certificate filename cannot be longer than 32 characters, including the
.pem extension.
5
Local Cert — If Local Mode is set to Upload, click the Browse button to locate a
certificate on the host PC. Click Import to commit this certificate to the DMP 128
FlexPlus. Click Export to save the current local certificate to the default download
directory of the web browser on the host PC.
6
Private Key — If Local Mode is set to Upload, click the Browse button to locate a
private key on the host PC. Click Import to commit this key to the DMP 128 FlexPlus.
Click Export to save the current private key to the default download directory of the
web browser on the host PC.
7
Server Certs — Displays up to eight server certificates that can be stored on the
DMP128FlexPlus at any one time. The following buttons are also available.
• Add Cert — Click to add a server certificate to the system.
• Add CA — Click to add a Certificate Authority certificate to the system.
• Remove — Highlight a listed certificate and click this button to remove it from the
system.
8
Apply Button — Commits changes made to the transport protocol configuration to the
DMP 128 FlexPlus.
To Next Page
Loading...
Need help?
General
