C-4
Edge Repair Fee Schedule
(Out of Maintenance/Warranty Owners Only!)
System Testing and Evaluation Fee - Contact your local FARO
Service Center for pricing.
A fee is charged for any system testing and evaluation. This includes
system diagnosis, compensation and/or calibration, and applies to all
Edges. However, this fee does not include disassembly/repair costs if
required. An estimated cost for disassembly/repair will be given to the
customer prior to the repair. The disassembly/repair charges must be
paid in full prior to the actual disassembly/repair. However, if no repairs
are needed the fee will be applied to the cost of system testing and
evaluation. All evaluations contain a compensation. Calibration will be
performed on an “as needed” basis.
Contact your local FARO Service Center for the current system testing
and evaluation fee pricing.
Repair Times
Compensation and/or Calibration Only - Can take up to 14 days to
complete.
Disassembly and Repair - Can take up to 60 days to complete. This
time is dependent on the supply of purchased components.
*Includes Compensation and Calibration
08M52E00_FaroArm_Edge.book Page 4 Thursday, October 4, 2012 9:31 AM
To Next Page
Loading...
