FoxGate S6124 - Show Lldp Interface Ethernet; Show Lldp Neighbors Interface Ethernet

107
Ethernet1/1 0 0 0 0 7 0 0
7.14 show lldp interface ethernet
Command: show lldp interface ethernet <IFNAME>
Function: Display the configuration information of LLDP on the port, such as: the working
state of LLDP Agent.
Parameters: <IFNAME>: Interface name.
Default: Do not display the configuration information of LLDP on the port.
Command Mode: Admin Mode, Global Mode.
Usage Guide: Users can check the configuration information of LLDP on the port by
using ―show lldp interface ethernet XXX‖.
Example: Check the configuration information of LLDP on the port after LLDP is enabled
on the switch.
Switch(config)#show lldp interface ethernet 1/1
Port name: ethernet 1/1
LLDP Agent Adminstatus: Both
LLDP Operation TLV: portDecs sysName sysDesc sysCap
LLDP Trap Status: disable
LLDP maxRemote: 100
LLDP Overflow handle: discard
LLDP interface remote status : Full
7.15 show lldp neighbors interface ethernet
Command: show lldp neighbors interface ethernet < IFNAME >
Function: Display the LLDP neighbor information of the port.
Parameters: None.
Default: Do not display the LLDP neighbor information of the port.
Command Mode: Admin Mode, Global Mode.
Usage Guide: Users can check the LLDP neighbor information of the port by using ―show
lldp neighbors interface ethernet XXX‖.
Example: Check the LLDP neighbor information of the port after LLDP is enabled on the
port.
Switch(config)#show lldp neighbors interface ethernet 1/1