FoxGate S6124 - Vlan Ingress Enable

127
10.1.19 vlan ingress enable
Command: vlan ingress enable
no vlan ingress enable
Function: Enable the VLAN ingress rule for a port; the ―no vlan ingress enable‖
command disables the ingress rule.
Command mode: Global Mode.
Default: VLAN ingress rules are enabled by default.
Usage Guide: When VLAN ingress rules are enabled on the port, when the system
receives data it will check source port first, and forwards the data to the destination port if
it is a VLAN member port.
Example: Disable VLAN ingress rules on the port.
Switch(Config-If-Ethernet1/1)# no vlan ingress enable