FoxGate S6124 - Show Access Group; Show Firewall

294
any-destination-mac tagged-eth2 14 2
0800
addresses and any destination MAC
addresses and the packets whose 15th
and 16th byte is respectively 0x08 , 0x0 to
pass.
27.24 show access-group
Command: show access-group in (interface {Ethernet | Ethernet IFNAME})
Functions: Display the ACL binding status on the port.
Parameters: IFNAME, Port name.
Default: None.
Command Mode: Admin and Configuration Mode.
Usage Guide: When not assigning interface names, all ACL tied to port will be revealed.
Examples:
Switch#show access-group
interface name: Ethernet 1/1
IP Ingress access-list used is 100, traffic-statistics Disable.
interface name: Ethernet1/2
IP Ingress access-list used is 1, packet(s) number is 11110.
Displayed information
Explanation
interface name: Ethernet 1/1
Tying situation on port Ethernet1/1
IP Ingress access-list used is
100
No. 100 numeric expansion ACL tied to entrance
of port Ethernet1/1
packet(s) number is 11110
Number of packets matching this ACL rule
27.25 show firewall
Command: show firewall
Functions: Reveal configuration information of packet filtering functions.
Parameters: None.
Default: None.
Command Mode: Admin and Configuration Mode.
Examples: