363
Switch# debug ntp adjust
40.13 debug ntp sync
Command: debug ntp sync
no debug ntp sync
Function: To enable/disable debug switch of displaying local time synchronization
information.
Parameter: None.
Default: Disabled.
Command Mode: Admin Mode.
Usage Guide: None.
Example: To enable debug switch of displaying local time synchronization information.
Switch# debug ntp sync
40.14 debug ntp events
Command: debug ntp events
no debug ntp events
Function: To enable/disable debug switch of displaying NTP event.
Parameter: None.
Default: Disable the debug switch of displaying NTP event.
Command Mode: Admin Mode.
Usage Guide: To enable debug switch of displaying NTP event, after that, if some server
changed from available to unavailable or from unavailable to available, the received illegal
packet events will be printed.
Example: To enable debug switch of displaying NTP event information.
Switch# debug ntp events
40.15 show ntp status
Command: show ntp status
Function: To display time synchronization status, include synchronized or not, layers,
To Next Page
Loading...
